Home / Tag "Woodworking" (Page 5)

I can see clearly now…

ShedWoodworkingWorkbench

It’s entirely possible only other people who do woodwork in tiny, tiny sheds will understand the unbelievable awesomeness of what’s on my bench at the moment.

I even gave it a coat of BLO&turps since I have no idea when I’ll next see it that clear again.

Now I just need to tidy up down by its right front leg so I can stand in front of the end vice and I might be able to plane the sides of the bookshelf project without swearing too much…

Also, I need to have a rule in the shed that I will never ever ever ever again put a box or box-like container on the bench for just five minutes to hold one or two small things out of the way.… Read the rest

Read More
Mark Dennehy in No Comments

Shed jobs

ShedShelvesTools
More
Woodworking

Still working on sketches for the next project, and it’s too hot to do very much (we’re Irish, we melt somewhere between 24C and 26C and we’re topping out at 30C now so of course we’re all draped over a couch, only moving if we hear the ice cream van…)

Sketchup and me and curved surfaces is an unfamiliar territory, but the way you draw it is fairly close to building it that you make a rectangle, match it against other shapes, cut off the excess and shape any curves and so on, so the actual process is like a long-winded finicky walkthrough with your brain on how you’re going to build the thing. So, helpful, sort of.
Meanwhile, pottering about doing shed jobs, popping glue off the silicone glue brushes and trays, tidying up a bit, that sort of thing.… Read the rest

Read More
Mark Dennehy in No Comments

Sunbathing poplar

DesignShelvesStringing
More
ToolsWoodworking

So asking on UKworkshop about that clamping problem I was thinking about with the shelf/desk project led to the conclusion that housing joints won’t work and tapered sliding dovetail joints are the better choice. That will probably mean some router work because of the precision needed – I could probably make a tapered dovetail joint that wouldn’t pull out, but one that would be precise enough to maintain the shelves against racking would be beyond me. So a new router bit, get that router table out of storage and actually assemble it (I basically picked it up in Lidl intending to use parts of it in a proper router table at some point and then just developed a dislike for routers in general 😀 ), and that sorts two of the shelves out; the third gets dovetailed into the top shelf which will also help with racking.… Read the rest

Read More
Mark Dennehy in 2 Comments