Home / Tag "Workshop" (Page 4)

Sunbathing poplar

DesignShelvesStringing
More
ToolsWoodworking

So asking on UKworkshop about that clamping problem I was thinking about with the shelf/desk project led to the conclusion that housing joints won’t work and tapered sliding dovetail joints are the better choice. That will probably mean some router work because of the precision needed – I could probably make a tapered dovetail joint that wouldn’t pull out, but one that would be precise enough to maintain the shelves against racking would be beyond me. So a new router bit, get that router table out of storage and actually assemble it (I basically picked it up in Lidl intending to use parts of it in a proper router table at some point and then just developed a dislike for routers in general 😀 ), and that sorts two of the shelves out; the third gets dovetailed into the top shelf which will also help with racking.… Read the rest

Read More
Mark Dennehy in 2 Comments

Can you tell what it is yet?

ShelvesWoodworking

Well, that empty In Progress… list lasted a while, didn’t it?
Though I actually went back through my notebook…

…and every project in there bar this one is marked as Done or (in one or two cases) marked as Won’t Do, What Was I Thinking. This one will be a small bookshelf for Calum. Well, small to you and me, but not to him. The idea is this will have his books and toys and assorted child-related detritus now (he’s six and between kindergarten and vorschule so just learning to read and write at the moment) and we figure he really won’t have “homework” in the traditional I-need-a-proper-desk-and-I-still-don’t-want-to-do-it sense until he’s nine or ten, so off to the internet I go and I grab the UK90 based growth rate charts for boys aged 2 to 18, and find Calum’s centrile, so now I have his current height and his predicted height until he’s nine (it’s not that accurate, they change centriles faster than they change their socks if you don’t tell them to, but it’s better than pulling a number completely out of thin air.… Read the rest

Read More
Mark Dennehy in No Comments

Pottering about

ShedToolsWoodworking

Last project finished, next one not properly started yet (just have the rough cuts done) and another in mind but not off the notepad yet. So now’s the time to work on the shed itself…

That’s the dust collection for the shed (it’s collapsed because the vacuum hose got clogged with shavings and the shop vac managed to pull enough air out of the barrel for atmospheric pressure to crush it). It’s a bit… big. For the shed at least. So a while back, I got a smaller drum.

And it’s been sitting there since I bought it, getting in the way, because I was trying to get other stuff done. So…

Out with the old…

And mark out and measure for the minicyclone seperator in the lid of the new drum, cut out the large hole with, of all things, the lie-nielsen radius cutter I was using for stringing on the last project, and then drill the holes for the attachment screw and fit it.… Read the rest

Read More
Mark Dennehy in No Comments